iNode GSM MQTT BT

Radio parameters:

• RX/TX;
  • BLE: 2402-2480 MHz
• output power (maximum):
  • BLE: +8dBm
• modulation:
  • BLE: GFSK
• antenna:
  • external: 2,4 GHz 3dBi, with SMA male plug connector;

Bluetooth Low Energy & GSM/GPRS:

• configurable from PC:
  • Scan Window / Scan Interval: ranging from 1 to 100%;
  • device access password;
  • GPRS network parameters – APN name, user and password;
  • device name in the GSM/GPRS network;
  • MQTT server parameters;
  • JSON data filter;
    

Modem GSM/GPRS:

• Fibocom G510 GPRS meeting the essential requirements of Annexes 1 and 3 of the RED 2014/53 / EU directive, which is used in accordance with its intended use and manufacturer's instructions:
  • Quad Band 900/1800MHz 850/1900MHz;
  • Multi-slot class 12 (4 DL slots, 4 UL slots); Max BR DL/UL 85.6 Kbps; Coding Scheme CS1-CS4;Class B;

GSM antenna connector:

• type SMA-female;
• the parameters of the recommended antenna:
  • frequency: Quad Band: 850/900/1800/1900 MHz
  • gain: 0 dB but not more than 2.5 dBi
  • impedance: 50 Ω
  • VSWR: 1.5:1; in the worst case of 2.5:1

Power supply:

• micro USB socket for connecting an external power supply 230V AC/50 Hz / 5V DC 1000mA of double insulation or strengthened; voltage in the range 5V to 48V;
• the maximum length of the connection cable: 3 m;

Housing:

• metal case;
• dimensions: 60 mm x 38 mm x 22 mm (LxWxH);

Other:

• possibility of software replacement and configuration via USB - WebUSB functionality;
• the ability to remotely replace firmware and configuration using the MQTT server;
• connector for micro-SIM cards;
• LED: Red-Green;
• temperature sensor with a resolution of 1 °C;
• operating temperature: from -30 to 65 °C;
• humidity: 35-90 % RHG.
• weight: 50 g;

Software:

• Google CHROME: Android OS, Linux, Windows 10;

Equipment:

• external antenna. ISM 866 MHz, 2dBi gain, with SMA male plug connector;
• external antenna, GSM, dual band, 900/1800 MHz, 2dBi gain, with SMA male plug connector;

Chipset:

• STM32L082;
• CSR 1011
• G510

Instruction manual for the iNode GSM MQTT BT.

Apps for ANDROID and WINDOWS. Application iNodeSetup.exe works on Windows with Bluetooth adapter based on chipset CSR8510 or the iNode Serial Transceiver USB, iNode LAN. On Linux the iNode Serial Transceiver USB and/or iNode LAN is needed and e.g. Ubuntu with Wine installed (described in FAQ section).

Current firmware for iNode products is available at our technical support service: http://support.elsat.com.pl/
user: inode
without a password

• Alarm systems
• Medical: patient monitoring, fall detection
• Care of older people
• Home Automation

BLUETOOTH LOW ENERGY, INTERNET OF THINGS, IoT, UDP, TCP/IP, HTTP, GSM, GPRS, CSR101x, AES128, HCI